ANCHORING CLAMPS (INSULATED MESSENGER SYSTEM)

Anchoring Clamps for Insulated Neutral Messenger System is used for fixation of cable to the strength member

This Anchoring Clamps consists of a body, self-adjusting captive wedges and flexible bail:

• Body is made of High strength cast aluminum alloy
• Self-Adjusting Captive Wedges are made of UV and weather resistant thermoplastic
• Bail are made of Corrosion resistant, flexible stainless steel wire Anchoring Clamps are easy for installation without any tools.

ANCHORING CLAMPS (SELF-SUPPORTING SYSTEM)

Anchoring Clamps for Self-Supporting System are used to anchor 2C or 4C insulated bundled Cables

This Anchoring Clamps consists of a Clamping Plates, Wedges and Bolts:

• Clamping Plates is made of Galvanized Steel
• Wedges are made of UV and weather resistant thermoplastic.
• Bolts are of Galvanized Steel. There is even load distribution on cable's insulation

SERVICE CLAMPS (INSULATED MESSENGER SYSTEM)

Service Clamps (Insulated Messenger System) is suitable for insulated low-voltage AB cable.

It is also suitable for multiple conductors widely used on poles or walls in rural and urban aerial distribution network.

This Service Clamps consists of a body, wedges and bail:

• Body and Wedges are made of UV and weather resistant thermoplastic.
• Bails are of Stainless Steel or Galvanized Steel
• Bolts are of Galvanized Steel. There is even load distribution on cable's insulation. The clamp can be easily installed without damage to the cable insulation.

BRACKET FOR ANCHORING CLAMPS

The Bracket is made of corrosion-resistant aluminum alloy. Brackets should be fixed with two bolts of M14 or M16 or with a stainless steel strap 20 x 0.7 mm

This is used for fixing of one or two anchoring clamps. Can be installed without any tools

SUSPENSION CLAMPS (UNINSULATED MESSENGER SYSTEM)

Suspension Clamps for Uninsulated Messenger System are used to suspend and grip the uninsulated messenger cable.

This Suspension Clamps consists of a body, bolts and insulating cover:

• Body is made of High strength aluminum alloy
• Bolts are of Galvanized Steel
• Insulating Cover is of UV and weather resistant thermoplastic.

BRACKET FOR SUSPENSION CLAMPS

The Bracket is made of corrosion-resistant aluminum alloy. Brackets should be fixed with two bolts of M14 or M16 or with a stainless steel strap 20 x 0.7 mm

INSULATION PIERCING CONNECTOR

The Insulation Piercing Connectors are applicable for all types of ABC conductors as well as connections in service line system.

Main line: Insulated aluminum cable

Tap line: Insulated aluminum cable or Insulated copper cable

Special designed shear head bolt allows efficient installation under controlled shear torque which ensure the contact teeth properly penetrate the conductor without damaging the mechanical strength of the conductor.Seals and grease are applied to prevent moisture entering the cable and connector which guaratees excellent waterproof and corrosion resistant performance. End cap is attached to the body. No loose parts could fall to ground during installation.

SUSPENSION CLAMPS (INSULATED MESSENGER SYSTEM)

Suspension Clamp for Insulated Messenger System consists of a body, movable link and adjustable lock:

• Body and Movable Link are made of UV and weather resistant thermoplastic.
• Lock is made of UV resistant thermoplastic. The clamp can be easily installed without damage to the cable insulation